TQ215AR-11
| 产品描述: TQ(1)(2)-(3)(4)-(5)-(6) |
| 215 | 金属外壳 |
| 215L | 金属外壳 |
| (2) | |
| 无 | Pulling direction of the towing eye upwards |
| AL | Pulling direction of the towing eye to the left |
| AR | Pulling direction of the towing eye to the right |
| 11 | 1 NO 触点/1 NC 触点 |
| 02 | 2 NC 触点 |
| 12 | 1 NO 触点/2 NC 触点 |
| 无 | 触头镀银(标准) |
| A1 | 金触头 0.3 μm |
| A2 | 金触头 1.0 μm |
| A3 | 金触头 3.0 μm |
| (5) | |
| 无 | without LED |
| G | Status LED |
| 无 | M20接线口 |
- 金属外壳
- 按EN 50047设计
- 快速连接技术,连接端子可旋转45°
- 接线口尺寸 1 x M20 x 1,5
订货数据
| 型号 |
TQ215AR-11 |
| 商品编号(订购编号) |
103044929 |
| EAN(欧洲商品编号) |
4030661616667 |
| eCl@aa number,版本:12.0 |
27-27-06-07 |
| eCl@aa number,版本:11.0 |
27-27-06-07 |
| eCl@aa number,版本:9.0 |
27-27-06-07 |
| ETIM 编号,7.0 版 |
EC000030 |
| ETIM 编号,6.0 版 |
EC000030 |
许可 - 标准
| 证书 |
cULus CCC |
总体数据
| 标准型 |
EN IEC 60947-5-1 |
| 外壳结构类型 |
标准结构设计 |
| 操动件型号符合 EN 50047 |
B |
| 外壳材料 |
金属,压铸锌 |
| 垫圈镀层材料 |
涂色 |
| 线长,最大 |
25 m |
| 毛重 |
336 g |
机械参数
| 机械寿命,最少 |
10,000,000 操作 |
| 操动方向 |
右面 |
| 肯定断开操作力,最小 |
40 N |
| 固定螺栓紧固力矩 |
2 Nm |
| 箱盖紧固螺钉的拧紧扭矩 |
2.6 Nm |
机械参数 - 连接技术
| 连接器 |
螺丝端子 M20 x 1.5 |
| 线缆截面,最小 |
.34 mm² |
| 电缆截面,最大 |
1.5 mm² |
| 电气连接 紧固力矩, 最低 |
0.6 Nm |
| 电气连接 紧固力矩,最大值 |
0.8 Nm |
机械参数 - 尺寸
| 长度 |
32.4 mm |
| 宽度 |
31 mm |
| 高度 |
93.4 mm |
| 操动件宽度 |
91 mm |
| 操动件高度 |
21.4 mm |
环境条件
| 防护等级 |
IP66 IP67 |
| 工作环境温度 |
-30 ... +80 °C |
| 防护等级 |
I |
环境条件 - 绝缘值
| 额定绝缘电压 Ui |
250 VAC |
| 额定冲击耐受电压 Uimp |
4 kV |
| 污染等级 |
3 |
电气参数
| 热测试电流 |
10 A |
| 要求额定短路电流 |
400 A |
| 应用类别 AC-15 |
240 VAC |
| 应用类别 AC-15 |
3 A |
| 应用类别 DC-13 |
24 VDC |
| 应用类别 DC-13 |
3 A |
| 开关元件 |
1个NO 触点, 1个NC 触点 |
| 触点材料,电气 |
银 |
语言条件
数据表
操作指南及符合性声明
CCC认证
SISTEMA-VDMA 数据库
下载最新版本的Adobe Reader
产品图片(单独目录照片)
ID: ktq215f02
| 406,6 kB | .jpg | 352.778 x 489.303 mm - 1000 x 1387 px - 72 dpi
| 46,8 kB | .png | 74.083 x 102.658 mm - 210 x 291 px - 72 dpi
| 39,6 kB | .jpg | 88.9 x 123.47200000000001 mm - 252 x 350 px - 72 dpi
| 33,3 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 4,6 MB | .png | 169.333 x 234.865 mm - 2000 x 2774 px - 300 dpi
尺寸图 基本组件
尺寸图 基本组件
| EU Declaration of Conformity | ![]() |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | ZQ215 / ZQ315 1) TQ215 / TQ315 2) |
| Type: | See ordering code |
| Description of the component: | Pull-wire emergency stop switch ZQ215 and ZQ315 1), Pull-wire switch TQ215 and TQ315 2) |
| Relevant Directives: | 1) Machinery Directive | 2006/42/EC |
| 2) Low Voltage Directive | 2014/35/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-1:2017 + AC:2020 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1) EN ISO 13850:2015 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, April 26, 2023 |
![]() |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | ![]() |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | ZQ215 / ZQ315 1) TQ215 / TQ315 2) |
| Type: | See ordering code |
| Description of the component: | Pull-wire emergency stop switch ZQ215 and ZQ315 1), Pull-wire switch TQ215 and TQ315 2) |
| Relevant legislation: | 1) Supply of Machinery (Safety) Regulations | 2008 |
| 2) Electrical Equipment (Safety) Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 + AC:2020 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1) EN ISO 13850:2015 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, May 25, 2023 |
![]() |
| Authorised signature Philip Schmersal Managing Director |
施迈赛工业开关制造(上海)有限公司, 上海市青浦区漕盈路3336号,
所涉及的详细信息和数据已经过仔细检查。 图像可能与原始图像有所不同。 您可在说明书中进一步获得技术数据。 可能会有技术修改和错误。
Generated at: 2026/4/17 下午6:31

