IFL 15-300-10TK
IFL 15-300-10TK
Downloads
| Product type description: IFL (1)-(2)(3)-(4)(5)(6)(7)-(8) |
| (1) | |
| 10 | Switching distance 10 mm |
| 15 | Switching distance 15 mm |
| (2) | |
| 30 | Cylinder, thread M30, metal |
| 300 | Cylinder, thread M30, plastic |
| (3) | |
| without | Standard body |
| M | Miniature body |
| L | Long design |
| (4) | |
| 01 | Opener (NC) |
| 10 | Normally open contact (NO) |
| 10/01 | NO contact / NC contact with wiring compartment |
| 11 | 1 NO contact / 1 NC contact antivalent |
| (5) | |
| without | Cable |
| ST | Male connector |
| T | Conductor with strain relief |
| D | DC 2-wire |
| (6) | |
| without | Standard connector version |
| 2 | Alternative conector version |
| (7) | |
| N | n-type |
| P | p-type |
| (8) | |
| 1310 | Can be used up to +110 C (for alternating current (AC) only) |
| 2130 | Can be used up to +130 C, without LED switching conditions display |
| 1766 | Can be used up to +110 C (for p-type or n-type only) |
- Design M30
Ordering data
| Product type description |
IFL 15-300-10TK |
| Article number (order number) |
101080053 |
| eCl@ss number, version 12.0 |
27-27-40-01 |
| eCl@ss number, version 11.0 |
27-27-01-01 |
| eCl@ss number, version 9.0 |
27-27-01-01 |
| ETIM number, version 7.0 |
EC002714 |
| ETIM number, version 6.0 |
EC002714 |
General data
| Standards |
DIN VDE 0660-208 EN IEC 60947-5-2 |
| Housing construction form |
Cylinder, thread |
| Installation conditions (mechanical) |
not flush |
| Housing material |
Plastic |
| Active area |
Plastic |
| Material of the nuts |
Plastic |
| Material of the washer |
Perbunan |
| Gross weight |
150 g |
General data - Features
| Integral system diagnostics, status |
Yes |
| Cable sleeve |
Yes |
Mechanical data
| Tightening torque of nuts, maximum |
4 Nm |
Mechanical data - Switching distances
| Nominal switching distance Sn |
15 mm |
| Note (switching distance) |
All switching distances in accordance EN IEC 60947-5-2 |
Mechanical data - Connection technique
| Length of cable |
2 m |
| Termination |
Cable H03VV-F |
| Number of cable wires |
2 |
| Wire cross-section |
0.5 mm2 |
| Material of the Cable mantle |
PVC |
Mechanical data - Dimensions
| ISO thread of the sensor |
M30 |
| width across flats |
36 BK |
| Length of sensor |
98 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
| Resistance to vibrations |
10 … 55 Hz, amplitude 1 mm |
| Restistance to shock |
30 g / 11 ms |
| Protection class |
II |
Ambient conditions - Insulation values
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Rated supply frequency, minimum |
45 Hz |
| Rated supply frequency, maximum |
65 Hz |
| Operating voltage |
15 ... 250 VAC |
| Type of voltage range |
AC |
| Operating current, minimum |
10 mA |
| Rated operating voltage |
15 ... 250 VAC |
| Operating current |
500 mA |
| Switching element |
Normally open contact (NO) |
| Protection circuit integrated |
inductive interference protection |
| Switching frequency, approx. |
10 Hz |
Electrical data - Digital Output
| Voltage drop Ud, maximum |
4.5 V |
| Current at Voltage drop Ud |
0.5 A |
| Design of control elements |
Two-wire |
| Current leakage Ir, maximum |
1 mA |
Status indication
| Note (Integral System Diagnostics, status ) |
yellow LED |
Note
| Note (General) |
Instead of nuts, a mounting clamp can be provided. |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
Declaration of conformity (EC)
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: kifl1f11
| 380.5 kB | .jpg | 352.778 x 529.167 mm - 1000 x 1500 px - 72 dpi
| 57.9 kB | .png | 74.083 x 111.125 mm - 210 x 315 px - 72 dpi
| 26.3 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 4.1 MB | .png | 169.249 x 254 mm - 1999 x 3000 px - 300 dpi
| 29.3 kB | .jpg | 82.197 x 123.47200000000001 mm - 233 x 350 px - 72 dpi
Dimensional drawing basic component
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
101068520 ACC-IFL-MOCL-H30-M5X55
- For a smooth fitting of the proximity switches with cylindric shape Ø 30 mm or thread M30
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 18/04/2026, 15:07
Recently viewed
BNS 16-11ZV-ST1
LEVER KPL.H105 SPARE PART
PSC1-C-100-FB1
AZM 415-STS30-04
TQ 900-13
SLC240COM-ER-0490-30
