DHS-U1-BKWH-L5-5.00-LT

Item number: 103053688

DHS-U1-BKWH-L5-5.00-LT

Item number: 103053688

Downloads

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:
DHS-U1-BKWH-(1)-(2)-(3)

(1)
	Without electrical connection
LST5-0.25	Connecting cable with connector M12, 5-pole, 0.25 m
LST8-0.25	Connecting cable with connector M12, 8-pole, 0.25 m
L5-5.00	Connecting cable, 5-core, 5 m
L8-5.00	Connecting cable, 8-core, 5 m

(2)
	Door handle unilluminated
RGB	Door handle illuminated

(3)
	No operating element
LT	Illuminated pushbutton

Not all component variants, which are possible according to this order code are available and/or technically feasible.

With illuminated pushbutton
Connecting cable, 5-core, 5 m
Protection class IP65 / IP67
Machine status directly recognisable on the door handle
Door handle in an ergonomical design
Can be combined with solenoid interlock AZM40 or safety sensor RSS260
Can also be used without safety switchgear device
For left or right hinged safety guards

Ordering data

Product type description	DHS-U1-BKWH-L5-5.00-LT
Article number (order number)	103053688
EAN (European Article Number)	4030661640471
eCl@ss number, version 12.0	27-33-01-90
eCl@ss number, version 11.0	27-33-01-90
eCl@ss number, version 9.0	27-33-01-90
ETIM number, version 7.0	EC000229
ETIM number, version 6.0	EC000229

Approvals - Standards

Certificates	cULus

General data

Standards	EN IEC 60947-5-1
Housing material	Glass-fibre, reinforced thermoplastic
Material of the handle	translucent PMMA
Gross weight	575 g
Material of the holder	Glass-fibre, reinforced thermoplastic
Colour of the illuminated push button calotte	Yellow Blue Green Red White

General data - Features

Idle assignable pushbutton	Yes

Mechanical data

Mechanical lifetime, Command devices	1,000,000 Operations
Actuating stroke	1 mm
Actuating force, maximum	10 N
Note Bounce duration	Bounce duration at an Actuating speed of 100mm/s
Type of the fixing screws	2x M6
Tightening torque of the screw	3.5 Nm
Typical actuating force of the push button	10 N
Type of mounting screws for the handle body	2x Torx Plus T20x25
Tightening torque of mounting screws for the handle body	2.5 Nm

Mechanical data - Connection technique

Length of cable	5 m
Termination	Connecting cable, 5 pole
Wire cross-section	0.2 mm²
Cable diameter	5.5 mm
Bending radius (fixed)	5 x Ø-cable
Bending radius (repeated)	10 x Ø-cable
Wire cross-section	24 AWG
Material of the Cable mantle	PUR

Mechanical data - Dimensions

Length	202 mm
Width	40 mm
Height	84 mm

Ambient conditions

Degree of protection	IP66 IP67
Ambient temperature	-25 ... +65 °C
Storage and transport temperature	-40 ... +85 °C
Relative humidity, maximum	93 %
Note (Relative humidity)	non-condensing non-icing
Resistance to vibrations	10 … 150 Hz, amplitude 0.35 mm (EN 60947-5-2)
Restistance to shock	30 g / 11 ms (EN 60947-5-2)
Protection class	III
Permissible installation altitude above sea level, maximum	3,000 m

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 VDC
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

Operating voltage	24 VDC -15 % / +10 % (stabilised PELV power supply)
Current consumption inidcator lamp	30 mA
Rated operating voltage	24 VDC
Operating current	150 mA
Required rated short-circuit current	100 A
Utilisation category DC-12	24 VDC
Utilisation category DC-12	0.03 A
Utilisation category DC-13	24 VDC
Utilisation category DC-13	0.03 A
External wire and device fuse rating	2 A gG
Bounce duration, maximum	2 ms
Maximale Schalthäufigkeit	1,000 /h

Pin assignment

PIN 1	24 VDC: brown
PIN 2	Normally open contact (illuminated button): white (WH)
PIN 3	GND: Blue
PIN 4	Input LED (in illuminated button): black (BK)
PIN 5	n.c.: red (RD) or grey (GY)

Scope of delivery

Scope of delivery	The push button caps (blue, green, red, white, yellow) are included in the scope of delivery.
Note (scope of delivery, number and type)	The insert for use with the safety sensor RSS260 or without integrated actuator must be ordered separately.

Product picture (catalogue individual photo)

ID: kdhs-f31

| 418.3 kB | .jpg | 352.778 x 833.967 mm - 1000 x 2364 px - 72 dpi

| 68.4 kB | .png | 74.083 x 174.978 mm - 210 x 496 px - 72 dpi

| 14.6 kB | .jpg | 52.211000000000006 x 123.47200000000001 mm - 148 x 350 px - 72 dpi

| 16.5 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi

| 5.9 MB | .png | 169.333 x 400.389 mm - 2000 x 4729 px - 300 dpi

Detail photo

ID: kdhs-f32

| 14.7 kB | .jpg | 52.211000000000006 x 123.47200000000001 mm - 148 x 350 px - 72 dpi

| 426.5 kB | .jpg | 352.778 x 833.967 mm - 1000 x 2364 px - 72 dpi

| 70.0 kB | .png | 74.083 x 174.978 mm - 210 x 496 px - 72 dpi

EU Conformity Declaration

Pdf

EU Declaration of Conformity

Original

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives.

Name of the component:

DHS-U1

Type:

See ordering code

Description of the component:

Door handle system

Relevant Directives:	EMC-Directive	2014/30/EU
	RoHS-Directive	2011/65/EU

Applied standards:

EN 60947-5-1:2017 + AC:2020

Person authorised for the compilation of the technical documentation:

Oliver Wacker
Möddinghofe 30
42279 Wuppertal

Place and date of issue:

Wuppertal, May 21, 2024

Authorised signature
Philip Schmersal
Managing Director

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 17/04/2026, 18:51

Cart

Login Register now

DHS-U1-BKWH-L5-5.00-LT