Elde mevcut değil!

101159512

SRB219IT-24VAC/DC

101158208

4250116201570

27-37-18-19

27-37-18-19

27-37-18-19

EC001449

EC001449

cULus

EN IEC 62061

EN ISO 13849-1

EN IEC 60947-5-1

EN IEC 60947-5-3

EN IEC 60947-5-5

EN IEC 61508

EN IEC 60204-1

EN IEC 60947-1

EN 60068-2-78

Plastik, fiber cam takviyeli termoplastik, havalandırılmış

360 g

Evet

Evet

Evet

Evet

Evet

Evet

Evet

Evet

Evet

Evet

1

7

2

7

1

3

8

EN IEC 60947-5-1

EN IEC 61508

0

1

e

d

4

3

≥ 99 %

> 60 %

2,00 x 10⁻⁸ /h

2,00 x 10⁻⁷ /h

3

2

20 Yıl(lar)

65

10.000.000 operasyon sayısı

EN 60715 e uygun standart DIN rayının üzerine kilitlenir

IEC/EN 60947-1

0,25 mm²

2,5 mm²

0,6 Nm

solid single-wire

flexible

Screw terminals

45 mm

100 mm

121 mm

IP40

IP54

IP20

-25 ... +45 °C

-40 ... +85 °C

10...55 Hz, Genlik 0.35 mm, ± 15 %

30 g / 11 ms

4 kV

III

2

50 Hz

60 Hz

24 VAC -15 % / +10 %
24 VDC -15 % / +20 %

10 %

24 VAC

24 VDC

200 mA

20.4 VAC

26.4 VAC

20.4 VAC

26.4 VAC

20,4 VDC

28,8 VDC

4,4 W

5,2 VA

0,1 Ω

yeni durumda

15 ms

60 ms

200 ms

Ag-Ni 10 ve 0.2 µm altın kaplama

40 Ω

EMC-Directive

Konum rölesi K2

Konum rölesi K1

Dahili çalışma gerilimi U_i

Konum rölesi K3

Konum rölesi K5

Güvenlik sensörü

Koruma sistemi

Acil Stop butonu

Halatlı acil stop anahtarları

Işıklı güvenlik perdesi

Inductive loads (e.g. contactors, relays, etc.) are to be suppressed by means of a suitable circuit.

The wiring diagram is shown with guard doors closed and in de-energised condition.

The ISD tables (Intergral System Diagnostics) for analysis of the fault indications and their causes are shown in the appendix.

The control system recognises wire-breakage and earth faults in the monitoring circuit.

Relay outputs: Suitable for 2 channel control, for increase in capacity or number of contacts by means of contactors or relays with positive-guided contacts.

Connect potential p-type outputs of safety light grids/curtains to S12/S22. The devices must have the same reference potential.

Time delay: The time-delayed safety enable 37/38 is adjustable for 1 to 30 seconds drop-out delay (see setting intructions).

Setting of the drop-out delay time is carried out by means of a potentiometer from the front of the enclosure.

For 2-channel control with cross-wire monitoring, connect the NC contact to S11/S12 and S31/S32 and bridge S21/S22

"Start function / Reset button: The function "trailing edge" is programmed by means of the "AF" switch located underneath the housing cover (switch position = 1). The automatic start is programmed by bridging terminals X3/X5 and by switching the "AF" switch to 0. The time offset between the channels is approx. 100 ms. An endless time offset between the channels 1 and 2 is programmed by bridging the terminals X3/X6."

Input level: The example shows a 2-channel control of a guard door monitoring with two position switches, whereof one with positive break, external reset button (R) and feedback circuit (H2). (example without cross-wire monitoring)

For 1-channel control, connect NC contact to S11/S12 and bridge S21/S22 + S31/S32

Early switch-off of time delay: The drop-out delay time can be ended early via the input RT. The input RT makes it possible to "switch off" the time-delayed enabling circuit 37/38 before the set time has elapsed."

F1 = hibrid sigorta

F2 = Çıkışlara sinyal sağlamak için sigorta