TQ315AL-12A3
| 製品タイプの説明: TQ(1)(2)-(3)(4)-(5)-(6) |
| 215 | 金属製ハウジング |
| 215L | 金属製ハウジング |
| (2) | |
| なし | Pulling direction of the towing eye upwards |
| AL | Pulling direction of the towing eye to the left |
| AR | Pulling direction of the towing eye to the right |
| 11 | 1 NO 接点 / 1 NC 接点 |
| 02 | 2 NC接点 |
| 12 | 1 NO 接点/2 NC 接点 |
| なし | 銀メッキ接点 (標準) |
| A1 | 金接点 0,3 μm |
| A2 | 金接点 1,0 μm |
| A3 | 金接点 3,0 μm |
| (5) | |
| なし | without LED |
| G | Status LED |
| なし | ケーブル引込口: M20 |
- 金属製エンクロージャ
- 45°毎に回転出来る接続端子としての高速接続技術
- ケーブル引込口 1 x M20 x 1.5
- EN 50041による設計
注文データ
| 製品タイプの説明 |
TQ315AL-12A3 |
| 部品番号(注文番号) |
103048801 |
| EAN(欧州部品番号) |
4030661621470 |
| eCl@ss番号、バージョン12.0 |
27-27-06-07 |
| eCl@ss番号、バージョン11.0 |
27-27-06-07 |
| eCl@ss番号、バージョン9.0 |
27-27-06-07 |
| ETIM番号、バージョン7.0 |
EC000030 |
| ETIM番号、バージョン6.0 |
EC000030 |
認証
| 証明書 |
cULus CCC |
一般データ
| 規格 |
EN IEC 60947-5-1 |
| ハウジング形状 |
標準構造設計 |
| EN 50041に準拠したアクチュエーター型 |
B |
| ハウジング 材質 |
金属、亜鉛ダイキャスト |
| ハウジング材質コーティング材 |
塗装 |
| ワイヤー長、最大 |
25 m |
| 総重量 |
462 g |
機械的データ
| 機械的寿命、最小 |
10,000,000 操作 |
| アクチュエータ方向 |
Links |
| 強制開離力、最小 |
50 N |
| 取り付けネジの締め付けトルク |
2 Nm |
| ハウジングカバー用固定ネジの締め付けトルク |
2.6 Nm |
機械的データ - 電気機械式
| 接続 |
ネジ端子 M20 x 1.5 |
| ケーブル断面積、最小 |
0.34 mm² |
| ケーブル断面積, 最大 |
1.5 mm² |
| 電気接続部の締付けトルク、 最小 |
0.6 Nm |
| 電気接続部の最大締め付けトルク |
0.8 Nm |
機械的データ - 寸法
| 長さ |
32.4 mm |
| 幅 |
40 mm |
| 高さ |
93.4 mm |
| アクチュエーターの幅 |
91 mm |
| アクチュエーターの高さ |
21.4 mm |
環境条件
| 保護等級 |
IP66 IP67 |
| 使用周囲温度 |
-30 ... +80 °C |
| 保護等級 |
I |
環境条件 - 絶縁値
| 定格絶縁電圧 Ui |
300 VAC |
| 定格インパルス耐電圧 Uimp |
4 kV |
| 汚染度 |
3 |
電気的データ
| 熱試験電流 |
5 A |
| 要求定格短絡電流 |
400 A |
| 使用カテゴリー AC-15 |
240 VAC |
| 使用カテゴリー AC-15 |
3 A |
| 使用カテゴリー DC-13 |
24 VDC |
| 使用カテゴリー DC-13 |
3 A |
| スイッチエレメント |
1 NO 接点, 2 NC 接点 |
| 接点材質、電気的 |
Silber, vergoldet (AgNi 10 + Au 3µm) |
言語フィルター
データシート
Operating instructions and Declaration of conformity
CCC certification
SISTEMA-VDMA library
Adobe Readerの最新版をダウンロードしてください
Product picture (catalogue individual photo)
ID: ktq315f02
| 521,2 kB | .jpg | 352.778 x 528.461 mm - 1000 x 1498 px - 72 dpi
| 56,2 kB | .png | 74.083 x 110.772 mm - 210 x 314 px - 72 dpi
| 41,1 kB | .jpg | 82.55 x 123.47200000000001 mm - 234 x 350 px - 72 dpi
| 35,6 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 5,9 MB | .png | 169.333 x 253.661 mm - 2000 x 2996 px - 300 dpi
Dimensional drawing basic component
Dimensional drawing basic component
| EU Declaration of Conformity | ![]() |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | ZQ215 / ZQ315 1) TQ215 / TQ315 2) |
| Type: | See ordering code |
| Description of the component: | Pull-wire emergency stop switch ZQ215 and ZQ315 1), Pull-wire switch TQ215 and TQ315 2) |
| Relevant Directives: | 1) Machinery Directive | 2006/42/EC |
| 2) Low Voltage Directive | 2014/35/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 60947-5-1:2017 + AC:2020 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1) EN ISO 13850:2015 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, April 26, 2023 |
![]() |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | ![]() |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | ZQ215 / ZQ315 1) TQ215 / TQ315 2) |
| Type: | See ordering code |
| Description of the component: | Pull-wire emergency stop switch ZQ215 and ZQ315 1), Pull-wire switch TQ215 and TQ315 2) |
| Relevant legislation: | 1) Supply of Machinery (Safety) Regulations | 2008 |
| 2) Electrical Equipment (Safety) Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 60947-5-1:2017 + AC:2020 1) EN 60947-5-5:1997 + A1:2005 + A11:2013 + A2:2017 1) EN ISO 13850:2015 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, May 25, 2023 |
![]() |
| Authorised signature Philip Schmersal Managing Director |
シュメアザー株式会社, 〒222-0033 横浜市港北区新横浜3-9-5, 新横浜第3東昇ビル
データと詳細は完全にチェックされました。画像は元の画像と異なる場合があります。技術的なデータはマニュアルで見られます。技術的に変更されたり、エラーの可能性があります。
Generated at: 2026/04/17 18:59

