IFL 15-30-10STP

Item number: 101108111

IFL 15-30-10STP

Item number: 101108111

Downloads

ePLAN Data

CADENAS CAD Data

SISTEMA Data

Product type description:

IFL (1)-(2)(3)-(4)(5)(6)(7)-(8)

(1)
10	Switching distance 10 mm
15	Switching distance 15 mm

(2)
30	Cylinder, thread M30, metal
300	Cylinder, thread M30, plastic

(3)
without	Standard body
M	Miniature body
L	Long design

(4)
01	Opener (NC)
10	Normally open contact (NO)
10/01	NO contact / NC contact with wiring compartment
11	1 NO contact / 1 NC contact antivalent

(5)
without	Cable
ST	Male connector
T	Conductor with strain relief
D	DC 2-wire

(6)
without	Standard connector version
2	Alternative conector version

(7)
N	n-type
P	p-type

(8)
1310	Can be used up to +110 C (for alternating current (AC) only)
2130	Can be used up to +130 C, without LED switching conditions display
1766	Can be used up to +110 C (for p-type or n-type only)

Not all component variants, which are possible according to this order code are available and/or technically feasible.

Metal enclosure
DC 3-wire
miniature body
Connector M12
Design M30

Ordering data

Product type description	IFL 15-30-10STP
Article number (order number)	101108111
EAN (European Article Number)	4030661018706
eCl@ss number, version 12.0	27-27-40-01
eCl@ss number, version 11.0	27-27-01-01
eCl@ss number, version 9.0	27-27-01-01
ETIM number, version 7.0	EC002714
ETIM number, version 6.0	EC002714

Approvals - Standards

Certificates	CCC

General data

Standards	DIN VDE 0660-208 EN IEC 60947-5-2
Housing construction form	Cylinder, thread
Installation conditions (mechanical)	not flush
Housing material	Brass
Housing coating material	nickel-plated
Active area	Plastic
Material of the nuts	Brass
Gross weight	136 g

General data - Features

Integral system diagnostics, status	Yes
Number of cable wires	3

Mechanical data

Tightening torque of nuts, maximum	30 Nm

Mechanical data - Switching distances

Nominal switching distance S_n	15 mm
Note (switching distance)	All switching distances in accordance EN IEC 60947-5-2

Mechanical data - Connection technique

Length of cable	2 m
Termination	Connector M12 Connector M12 x 1
Material of the Cable mantle	PVC

Mechanical data - Dimensions

ISO thread of the sensor	M30
width across flats	36 BK
Length of sensor	72 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-25 ... +70 °C
Resistance to vibrations	10 … 55 Hz, amplitude 1 mm
Restistance to shock	30 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated impulse withstand voltage U_imp	4 kV

Electrical data

Rated supply frequency, minimum	45 Hz
Rated supply frequency, maximum	65 Hz
Operating voltage	10 ... 30 VDC
Type of voltage range	DC
No-load supply current I₀, typical	3.5 mA
Rated operating voltage	10 ... 30 VDC
Operating current	200 mA
Switching element	Normally open contact (NO)
Protection circuit integrated	inductive interference protection Protection against polarity reversal Surge protection Max. fuse rating
Switching frequency, approx.	100 Hz

Electrical data - Digital Output

Voltage drop U_d, maximum	1.2 V
Current at Voltage drop U_d	0.2 A
Design of control elements	p-type
Current leakage I_r, maximum	1 mA

Status indication

Note (Integral System Diagnostics, status )	yellow LED

Note

Note (General)	Instead of nuts, a mounting clamp can be provided.

Product picture (catalogue individual photo)

ID: kifl1f60

| 352.7 kB | .jpg | 352.778 x 439.56100000000004 mm - 1000 x 1246 px - 72 dpi

| 59.2 kB | .png | 73.73100000000001 x 92.075 mm - 209 x 261 px - 72 dpi

| 38.3 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi

| 4.4 MB | .png | 169.249 x 210.989 mm - 1999 x 2492 px - 300 dpi

| 35.9 kB | .jpg | 99.131 x 123.47200000000001 mm - 281 x 350 px - 72 dpi

Dimensional drawing basic component

ID: kifl1g42

| 152.8 kB | .jpg | 352.778 x 561.6220000000001 mm - 1000 x 1592 px - 72 dpi

Diagram

Information on diagram
ICO_LEG_ko-arrow4 Monitoring the interlock to EN ISO 14119
ICO_LEG_ko-arrow1 Positive break NC contact
ICO_LEG_ko-arrow2 Actuated
ICO_LEG_ko-arrow3 Not actuated
ICO_LEG_ko-open Normally-open contact
ICO_LEG_ko-close Normally-closed contact

ID: id3sk09

| 32.8 kB | .cdr |

| 44.0 kB | .jpg | 352.778 x 146.756 mm - 1000 x 416 px - 72 dpi

| 2.2 kB | .png | 74.083 x 30.692 mm - 210 x 87 px - 72 dpi

UK Conformity Declaration

Pdf

UK Declaration of Conformity

Company:

K.A. Schmersal GmbH & Co. KG
Möddinghofe 30
42279 Wuppertal
Germany
Internet: www.schmersal.com

Declaration:

We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom.

Name of the component:

IFL
Design: Ø 4, Ø 6,5, Ø 20, Ø 40,
M8, M12, M18, M30, 2.., 3.., 6.., R..

Type:

See ordering code

Description of the component:

Inductive proximity switch

Relevant legislation:	Electrical Equipment (Safety) Regulations	2016
	Electromagnetic Compatibility Regulations	2016
	The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations	2012

Designated standards:

EN IEC 60947-5-2:2020

UK-Importer / Person authorised for the compilation of the technical documentation:

Schmersal UK Ltd.
Paul Kenney
Unit 1, Sparrowhawk Close
Enigma Business Park
Malvern, Worcestershire, WR14 1GL

Place and date of issue:

Wuppertal, January 16, 2023

Authorised signature
Philip Schmersal
Managing Director

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 18/04/2026, 15:05

Cart

Login Register now

IFL 15-30-10STP