TR 330-11Y-1903
TR 330-11Y-1903
Downloads
- can be used as a safety switch
- temperature resistant version (up to 160°C)
- Actuator head can be repositioned in steps 4 x 90°
- Metal enclosure
- Long life
- 40 mm x 76 mm x 40 mm ( basic component)
- Suitable for low actuating speeds
- 1 Cable entry M 20 x 1.5
- free of silicon
- proved in power station applications
Ordering data
| Product type description |
TR 330-11Y-1903 |
| Article number (order number) |
101118496 |
| EAN (European Article Number) |
4030661275550 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
| Certificates |
CCC |
General data
| Standards |
EN IEC 60947-5-1 |
| Working principle |
mechanical |
| Housing material |
Light-alloy diecast, paint finish |
| Housing coating material |
painted |
| Gross weight |
205 g |
Mechanical data
| Actuating element |
Roller plunger |
| Roller material |
Brass |
| Actuating force, minimum |
17.5 N |
| Actuating speed, minimum |
1 mm/min |
Mechanical data - Connection technique
| Wire cross-section |
13 AWG |
Mechanical data - Dimensions
| Length of sensor |
40 mm |
| Width of sensor |
40 mm |
| Height of sensor |
116.5 mm |
| Width of Castor |
4.6 mm |
| Diameter of Castor |
17.2 mm |
Ambient conditions
| IP Degree of protection |
IP65 |
| Ambient temperature |
-30 ... +160 °C |
| Restistance to shock |
50 g / 6 ms |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
500 V |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Thermal test current |
6 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
2.5 A |
| Switching element |
1 NO contact, 1 NC contacts |
| Switching principle |
Snap action |
| Bounce duration, maximum |
1.5 ms |
| Material of the contacts, electrical |
Gold-plated silver (AgNi 15 + Au 0,3µm) |
Note
| Note (General) |
Actuation from the side of the plunger should be avoided, since this reduces the mechanical life of the position switch. |
Language filter
Datasheet
Operating instructions (supplementary sheet/quick guide)
Declaration of conformity (EC)
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: km330f02
| 808.6 kB | .jpg | 352.778 x 805.392 mm - 1000 x 2283 px - 72 dpi
| 130.3 kB | .png | 74.083 x 168.981 mm - 210 x 479 px - 72 dpi
| 26.5 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 9.1 MB | .png | 166.55700000000002 x 380.25 mm - 2000 x 4566 px - 305 dpi
| 37.3 kB | .jpg | 53.975 x 123.47200000000001 mm - 153 x 350 px - 72 dpi
Dimensional drawing basic component
Dimensional drawing actuator
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angleDiagram
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
131118496 TR 330-11Y-1903
- can be used as a safety switch
- temperature resistant version (up to 160°C)
- interlocked shaft and Swivel lever
- Actuator head can be repositioned in steps 4 x 90°
- Metal enclosure
- Long life
- 40 mm x 76 mm x 40 mm ( basic component)
- Suitable for low actuating speeds
- 1 Cable entry M 20 x 1.5
- free of silicon
- proved in power station applications
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 28/04/2026, 12:07
Recently viewed
SVE1/222-24VDC
SVE3/106/106/106-24VDC
MAF 330-11Y-M20
PS316-Z11-H310
SVE1/69-24VDC
TV10H 236-11ZZ
