TD 470-33Y
TD 470-33Y
Downloads
- 4 cable entries M 20 x 1.5
- Metal enclosure
- 6 Contacts
- 130 mm x 194 mm x 64 mm ( basic component)
- Actuator head can be repositioned in steps 4 x 90°
- Continuous adjustment of lever position 360°
- Lever can be transposed by 180°
- In temperature-resistant version, the roller can be mounted in two different positions on the shaft
Ordering data
| Product type description |
TD 470-33Y |
| Article number (order number) |
101059640 |
| EAN (European Article Number) |
4030661418124 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
| Certificates |
INMETRO |
General data
| Standards |
EN IEC 60947-5-1 |
| Working principle |
mechanical |
| Slide form |
Castor |
| Housing material |
Grey cast iron, galvanised |
| Housing coating material |
painted |
| Gross weight |
3,130 g |
General data - Features
| Number of normally closed (NC) |
3 |
| Number of normally open (NO) |
3 |
Mechanical data
| Actuating element |
Roller lever |
| Roller material |
Plastic |
| Mechanical lifetime, minimum |
10,000,000 Operations |
| Actuating angle, from left of switch axis |
30 ° |
| Actuating angle, from right of switch axis |
30 ° |
| Contact opening |
max. 2 x 6 mm |
| Actuating speed, minimum |
1 mm/min |
| Actuating speed, maximum |
3 m/s |
| Note (Actuating speed) |
Actuating speed with vertical actuating angle to switch axis |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
| Cable section, minimum |
1.5 mm² |
| Cable section, maximum |
2.5 mm² |
| Note |
All indications including the conductor ferrules. |
| Wire cross-section |
13 AWG |
Mechanical data - Dimensions
| Length of sensor |
64 mm |
| Width of sensor |
130 mm |
| Height of sensor |
332 mm |
| Width of Castor |
9 mm |
| Diameter of Castor |
36 mm |
Ambient conditions
| Degree of protection |
IP65 |
| Ambient temperature |
-30 ... +90 °C |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
400 V |
Electrical data
| Thermal test current |
16 A |
| Utilisation category AC-15 |
400 VAC |
| Utilisation category AC-15 |
4 A |
| Switching element |
NO contact, NC contact |
| Note (Switching element) |
with double break |
| Switching principle |
Slow action |
| Material of the contacts, electrical |
Silver |
Language filter
Datasheet
Operating instructions and Declaration of conformity
DNV-GL Certificate
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: bt441f09
| 63.1 kB | .png | 74.083 x 129.822 mm - 210 x 368 px - 72 dpi
| 159.1 kB | .jpg | 147.108 x 257.88100000000003 mm - 417 x 731 px - 72 dpi
| 33.9 kB | .jpg | 70.556 x 123.47200000000001 mm - 200 x 350 px - 72 dpi
| 26.3 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 5.5 MB | .png | 166.47400000000002 x 291.892 mm - 1999 x 3505 px - 305 dpi
Product picture (catalogue individual photo)
ID: kt-47f01
| 666.6 kB | .jpg | 352.778 x 529.167 mm - 1000 x 1500 px - 72 dpi
| 77.1 kB | .png | 74.083 x 111.125 mm - 210 x 315 px - 72 dpi
| 34.5 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 91.4 kB | .jpg | 282.22200000000004 x 423.333 mm - 800 x 1200 px - 72 dpi
| 6.4 MB | .png | 169.249 x 254 mm - 1999 x 3000 px - 300 dpi
| 41.2 kB | .jpg | 82.197 x 123.47200000000001 mm - 233 x 350 px - 72 dpi
Dimensional drawing basic component
Dimensional drawing actuator
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 18/04/2026, 00:42