schmersal_s_icon.png

BN 85-R-1824-3 2,0M

Item number: 103049555
BN 85-R-1824-3 2,0M

Downloads

ePLAN Data
CADENAS CAD Data
SISTEMA Data
  • Mounting with clamping brackets and sheathed cable
  • Non-contact principle
  • 1 Reed contakts
  • Long life
  • Actuating distance up to 40 mm depending on actuating magnet and version
  • 40 mm x 35 mm x 16,5 mm
  • Thermoplastic enclosure
  • Reed-contact to clip-in, on-location assembly

Ordering data

Product type description

BN 85-R-1824-3 2,0M
Article number (order number)

103049555
EAN (European Article Number)

4030661624327

General data

Working principle

Magnetic drive
Versions

Plug-in reed contact insert and base
Housing construction form

Block
Housing material

Glass-fibre, reinforced thermoplastic
Gross weight

35 g

General data - Features

Latching

Yes
Suitable for elevators

Yes
Number of snap-in contacts

1

Mechanical data

Active area

front side
Mechanical lifetime, minimum

1,000,000,000 Operations
Actuation direction

Lengthwise
Actuating speed, maximum

18 m/s
Mounting

clamping foot 8 mm

Mechanical data - Switching distances

Switching distance Sn

2 mm … 40 mm

BP 6S = 2 … 12 mm

BP 8S = 2 … 10 mm

BP 10S = 5 … 20 mm

2 x BP 10S = 6 … 27 mm

BP 15S = 5 … 22 mm

2 x BP 15S = 7 … 28 mm

BP 34S = 10 … 40 mm

BP 20S = 3 ... 28 mm

BP 31S = 4 ... 30 mm

BP 11S = 4 ... 23 mm

BP 12S = 5 ... 27 mm
Note (Switching distance Sn)

Actuating distance up to 40 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Note (switching distance)

All switching distances in accordance EN IEC 60947-5-2

Mechanical data - Connection technique

Length of cable

2 m
Termination

Pre-wired cable
Number of cable wires

2
Wire cross-section

0.25 mm2
Wire cross-section

23 AWG
Material of the Cable mantle

PVC
Cable type

LiYY

Mechanical data - Dimensions

Length of sensor

16.5 mm
Width of sensor

40 mm
Height of sensor

35 mm

Ambient conditions

Degree of protection

IP40
Ambient temperature

+0 ... +75 °C
Restistance to shock

60 g, on sine wave oscillation
Resistant to vibration

60 g, on sine wave oscillation

Electrical data

Switching voltage, maximum

60 VAC
Switching voltage, maximum

60 VDC
Switching current, maximum

1 A
Switching capacity, maximum

30 W
Switching capacity, maximum

30 VA
Note (Switching element)

Plug-in reed contact insert
Switching principle

Reed contacts, Non-contact principle

Latching
Bounce duration, maximum

0.2 ms
Maximum switching time close (NO)

2 ms
Maximum switching time open (NC)

0.07 ms

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BP 10 S

2x BP 10 S

BP 15 S

BP 34 S

BP 20 S

BP 31 S

BP 11 S

BP 12 S

BP 6 S

BP 8 S

2 x BP 15 S
Recommendation (actuator, lift switchgear)

BP 10

BP 6

2 x BP 15

2 x BP 10

BP 15

BP 34

Note

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 15/04/2026, 08:30