schmersal_s_icon.png

AV15RBKE4X30U-1453

Item number: 101083369

Downloads

ePLAN Data
CADENAS CAD Data
Product type description:

AV15(1)(2)(3)(4)(5)(6)(7)-(8)


(1)
LLeft-hand model
RRight-hand model

(2)
 Pull strap
HLever version H65
H92Lever version H92
H105Lever version H105
BBearing block B
B2Bearing block B2

(3)
 1 NC contact
K1 NC contact / 1 NO contact

(4)
 Protection class IP20
IP41Protection class IP41

(5)
 Without cable gland
E1M20 cable gland - metal
(single-wire entry)
E2M20 cable gland, plastic – polyamide
E4M20 cable gland, plastic – polyamide fibreglass reinforced

(6)
X11,5Dimension X: 11.5 mm
X20Dimension X: 20 mm
X30Dimension X: 30 mm
X40Dimension X: 40 mm
X45Dimension X: 45 mm
X15Dimension X: 15 mm
X25Dimension X: 25 mm
X35Dimension X: 35 mm

(7)
UInterlock bevel: bottom
DInterlock bevel: cover-side
RInterlock bevel: right
LInterlock bevel: left

(8)
GB215Additional front-side M8 mounting holes
xxxxxSpecial version

Note:
Regular font: Standard versions
Italic font: Special versions
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • right-hand model
  • 1 Auxiliary contact
  • Fail-safe locking system
  • for 1-leaf doors
  • authorised for use in passenger elevators
  • Manual release by means of M5 triangular key
  • Aluminium die cast enclosure

Ordering data

Product type description

AV15RBKE4X30U-1453

Article number (order number)

101083369

EAN (European Article Number)

4030661014593

eCl@ss number, version 12.0

27-27-26-03

eCl@ss number, version 11.0

27-27-26-03

eCl@ss number, version 9.0

27-27-26-03

ETIM number, version 7.0

EC002593

ETIM number, version 6.0

EC002593

Approvals - Standards

Certificates

TÜV

CCC

General data

Standards

EN 81-20

EN 81-50

Housing material

Light alloy die-casting

Material of the latching bolt

Brass

Gross weight

1,095 g

General data - Features

Manual release

Yes

With fail-safe locking system (Y/N)

Yes

Safety functions

Yes

Number of auxiliary contacts

1

Number of door leafs

1

Number of safety contacts

1

Mechanical data

Unlocking

Rotating unlatcher

Actuating element

Roller lever H65 and bearing block B

Orientation / Alignment

right-hand model

Mounting

two 9 x 11 mm slotted holes on the rear

two M8 mounting holes on the botten

Permanent magnet

Ceramic oxide magnets with high coercive field strength

Mechanical data - Connection technique

Cable entry

1 x M20 x 1,5

Material of the cable glant

Plastic, PA GF

Mechanical data - Dimensions

Width

165 mm

Height

80 mm

Depth

36 mm

Width of Castor

12 mm

Diameter of Castor

36 mm

Diameter of the latching bolt

18 mm

X-dimension of the latching bolt

30 mm

Note (X-dimension of the latching bolt)

The entire locking bolt length results from the prescribed insertion depth of the locking bolt into the door leaf of 21 mm and dimension X. Dimension X represents the distance between the bottom of the enclosure of the door closing device and the top of the door.

Design of the latching bolt

45° bevel, from below

Ambient conditions

Degree of protection

IP20

Ambient temperature

-15 ... +70 °C

Ambient conditions - Insulation values

Rated insulation voltage Ui

400 VAC

Rated impulse withstand voltage Uimp

6 kV

Electrical data

Thermal test current

10 A

Rated operating voltage

230 VAC

Rated operating voltage

200 VDC

Operating current

2,000 mA

Utilisation category AC-15

230 VAC

Utilisation category AC-15

2 A

Utilisation category DC-13

24 VDC

Utilisation category DC-13

1 A

Switching principle

Slow action

Material of the contacts, electrical

Silver

Switching element

NC contact, NO contact

Note

Note (General)

The illustrated door lock is an example of the actuation type and shows the variant with the maximum locking bolt x-dimension of 45 mm and a 45° chamfer at the bottom of the locking bolt.

Note (Manual release)

For manual release using M5 triangular key, available as accessory

Language filter

Download the latest version of Adobe Reader


K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 17/04/2026, 18:34