TQ 200-01
TQ 200-01
Downloads
- light alloy die-castingenclosure
- for suspended mounting
Ordering data
| Product type description |
TQ 200-01 |
| Article number (order number) |
151114531 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
General data
| Standards |
EN IEC 60947-5-1 |
| Housing material |
Light alloy die-casting |
| Gross weight |
706 g |
General data - Features
| Number of normally closed (NC) |
1 |
Safety classification
| Standards |
EN ISO 13849-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
2,000,000 Operations |
| Note (B10D Normally open contact (NO)) |
at 10% Ie and ohmic load |
Mechanical data
| Mechanical lifetime, minimum |
1,000,000 Operations |
| Actuating force, minimum |
36.8 N |
| Actuating force, maximum |
44 N |
| Actuating speed |
60 mm/min |
Mechanical data - Connection technique
| Length of cable |
3 m |
| Termination |
Shielded cable |
| Number of cable wires |
4 |
| Wire cross-section |
1 mm2 |
Mechanical data - Dimensions
| Width |
60 mm |
| Height |
250 mm |
| Depth |
32 mm |
Ambient conditions
| Degree of protection |
IP54 |
| Degree of protection of the control element |
IP67 |
| Ambient temperature |
-40 ... +80 °C |
| Storage and transport temperature |
-40 ... +80 °C |
| Relative humidity, maximum |
93 % |
| Note (Relative humidity) |
non-condensing |
| Resistance to vibrations |
10 - 150 Hz (0.5 mm / 5 g) |
| Restistance to shock |
30 g |
| Protection class |
II |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
40 V |
| Rated impulse withstand voltage Uimp |
2.5 kV |
| Overvoltage category |
III |
| Degree of pollution |
3 |
Electrical data
| Thermal test current |
1 A |
| Required rated short-circuit current |
1,000 A |
| Switching element |
Opener (NC) |
| Switching principle |
Slow action |
Language filter
Datasheet
Operating instructions and Declaration of conformity
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: ktq20f01
| 270.7 kB | .jpg | 352.778 x 529.519 mm - 1000 x 1501 px - 72 dpi
| 40.6 kB | .png | 74.083 x 111.125 mm - 210 x 315 px - 72 dpi
| 19.7 kB | .jpg | 82.197 x 123.47200000000001 mm - 233 x 350 px - 72 dpi
| 18.4 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 2.8 MB | .png | 169.333 x 254.169 mm - 2000 x 3002 px - 300 dpi
Dimensional drawing basic component
Switch travel diagram
Contact closed
Contact open
Setting range
Latching point
Positive opening path/angle
Monitoring the interlock to EN ISO 14119
Positive break NC contact
Actuated
Not actuated
Normally-open contact
Normally-closed contact
103040784 TQ 201-01
- light alloy die-castingenclosure
- for suspended mounting
Schmersal, Inc., 15 Skyline Drive, NY 10532 Hawthorne
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 2026-04-19, 5:19 a.m.
Recently viewed
