SFB-EIP-8M12-IOP
- Sikker feltboks for EtherNet/IP med CIP Safety
- For tilkobling av opptil 8 sikkerhetskoblingsanlegg
- Integrert dual-port bryter
- Tetthetsgrad IP66, IP67
Bestillingsinformasjon
| Produkt-typebetegnelse |
SFB-EIP-8M12-IOP |
| Artikkelnummer (bestillingsnummer) |
103015480 |
| EAN (European Article Number) |
4030661628691 |
| eCl@ss-nummer, versjon 12.0 |
27-24-26-04 |
| eCl@ss-nummer, versjon 11.0 |
27-24-26-04 |
| eCl@ss-nummer, versjon 9.0 |
27-24-26-04 |
| ETIM-nummer, versjon 7.0 |
EC001599 |
| ETIM-nummer, versjon 6.0 |
EC001599 |
Tillatelser - Standard
| Data |
TÜV cULus UKCA |
Gobale egenskaper
| Standard |
EN IEC 61131-1 EN IEC 61131-2 EN ISO 13849-1 EN IEC 60947-5-3 EN IEC 61508 |
| Kapslingsmateriale |
Plast, polyamid PA 6 GF |
| Materialet i identifikasjonsplate |
Plast, polyamid PA |
| Material of viewing window |
Polyamide PACM 12 |
| Material of electronic encapsulation |
Polyurethane 2K PU |
| Bruttovekt |
649 g |
Gobale egenskaper - Karakteristikker
| Integrert indikator, generelt |
Ja |
Klassifisering
| Standard |
EN ISO 13849-1 EN IEC 61508 |
Klassifisering - sikkerhetsinngang 2-kanal
| Performance Level, up to |
e |
| Kontrollkategori |
4 |
| Diagnostic Coverage (DC) Level |
99 % |
| PFH-verdi |
1,10 x 10⁻⁹ /h |
| PFDavg |
9,60 x 10⁻⁵ |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| Oppgavetid |
20 år |
| Response time of local safety input ⇒ Fieldbus, maximum |
20 ms |
| Notice |
The SFB fulfils the requirements as PDDB (proximity switch with defined behaviour under fault conditions) according to EN 60947-5-3 in combination with magnetic sensors (2 NC contacts) up to PL e / SIL 3. |
Klassifisering - sikkerhetsinnganger 1-kanal
| Performance Level, up to |
d |
| Kontrollkategori |
2 |
| Diagnostic Coverage (DC) Level |
90 % |
| PFH-verdi |
2,30 x 10⁻⁷ /h |
| PFDavg |
2,00 x 10⁻² |
| Safety Integrity Level (SIL), suitable for applications in |
1 |
| Oppgavetid |
20 år |
| Response time of local safety input > Fieldbus, maximum |
20 ms |
| Test interval for error detection |
10 s |
Klassifisering - sikkerhetsutgang 1-kanal
| Performance Level, up to |
d |
| Kontrollkategori |
3 |
| Diagnostic Coverage (DC) Level |
90 % |
| PFH-verdi |
1,00 x 10⁻⁷ /h |
| PFDavg |
8,80 x 10⁻³ |
| Safety Integrity Level (SIL), suitable for applications in |
2 |
| Oppgavetid |
20 år |
| Reaction time Fieldbus > local safety output |
50 ms |
Klassifisering - sikkerhetsutgang 2-kanal
| Performance Level, up to |
e |
| Kontrollkategori |
4 |
| Diagnostic Coverage (DC) Level |
99 % |
| PFH-verdi |
1,20 x 10⁻⁹ /h |
| PFDavg |
1,10 x 10⁻⁴ |
| Safety Integrity Level (SIL), suitable for applications in |
3 |
| Oppgavetid |
20 år |
| Reaction time Fieldbus > local safety output |
50 ms |
Mekaniske data
| Montering |
Skruer |
| Type of the fixing screws |
2x M6 |
| Tightening torque of the fixing screws, maximum |
3 Nm |
| Utforming av festeskruene, visningsvindu |
2x TX10 (Torx) |
| Tiltrekkingsmoment for festeskruene til visningsvinduet, maks |
0,6 Nm |
Mechanical data - Connection technique
| Konnektor stikk |
M12 konnektorsokkel / -stik |
| Konnektor stikk, inngang/utgang |
X0 - X7: M12, 8-polet, A-kodet |
| Terminal Connector, Power I/O |
M12 POWER, 4-pole, T-coded |
| Terminal Connector, Field bus |
M12, 4-pole, D-coded |
| Tiltrekkingsmoment for den elektriske forbindelsen, minimum |
0,8 Nm |
| Tightening torque of electrical connection, maximum |
1,5 Nm |
Mekaniske data - mål
| Lengde |
222,8 mm |
| Bredde |
63 mm |
| Høyde |
36,1 mm |
Omgivelsesbetingelser
| Tetthetsgrad |
IP66 IP67 |
| Arbeidstempratur |
-25 ... +55 °C |
| Lagrings- og transporttemparatur |
-25 ... +70 °C |
| Relativ fuktighet, minimum |
10 % |
| Relativ fuktighet, maksimum |
95 % |
| Note (Relative humidity) |
ikke kondenserende |
| Resistent mot vibrasjoner iht. EN 60068-2-6 |
10 … 150 Hz, Amplitude 0,35 mm / 5 g |
| sjokkresitanse |
30 g / 11 ms |
| Protection class |
III |
| Permissible installation altitude above sea level, maximum |
2.000 m |
Ambient conditions - Insulation values
| Isolasjonsspenning |
32 VDC |
| Nominell impulsmotstandsspenning |
0,8 kV |
| Overvoltage category |
III |
| Forurensningsgrad |
3 |
Elektriske data
| Driftsspenning |
24 VDC -15 % / +10 % |
| Driftsstrøm |
200 mA |
| Merkespenning |
24 VDC |
| driftssstrøm |
10.000 mA |
| Merknad (elektriske data, sikring) |
External fuse protection required ≤ 10A slow blow when used to UL 61010. |
| Tid til beredskap, maksimum |
12.000 ms |
| Device Watchdog Time |
12 ms |
| Reaction Time Safety Input, maximum |
20 ms |
| Reaction Time Safety Output, maximum |
50 ms |
Elektriske data – kommunikasjonsprotokoller
| Feldbus Protokoll |
EtherNet/IP / CIP Safety |
| Fieldbus specification |
V1.27 |
| Specification safety fieldbus |
V2.22 |
| Fieldbus properties |
Device Level Ring (DLR) |
| Transfer rate |
100 Mbit/s Full Duplex |
| Adressing |
Dynamic Host Configuration Protocol (DHCP) / BootP |
| Integrated switch |
Dual Port, 100 Mbit/s |
| Fieldbus services |
LLDP |
| Service interface |
WEB-Interface HTTP |
Electrical data - Device Ports
| Betegnelse, enhetstilkoblinger |
X0 ... X7 |
| Kabellengde, enhetstilkobling |
30 m |
Electrical data - Power supply external devices
| Designation, Power supply |
A1 and A2 |
| Merkespenning |
24 VDC |
| Driftssstrøm |
800 mA |
| Intern elektrisk sikring |
1.5 A (Integrated automatic resettable fuse) |
Electrical data - Safety digital inputs
| Designation, Safety inputs |
X1 and X2 |
| Koplingsterskler på sikkerhetsinnganger |
−3 V … 5 V (Low) 13 V ... 30 V (High) |
| Driftsstrøm for sikkerhetsinngangene ved 24 V |
6 mA |
| Tillatt gjenværende styrestrøm |
1 mA |
| Testpulsens varighet, minimum |
0,01 ms |
| Testpulsens varighet, maksimum |
1 ms |
| Testpulsintervall, minimum |
20 ms |
| Testpulsintervall, maksimum |
120.000 ms |
| Classification ZVEI CB24I, Sink |
C1 |
| Classification ZVEI CB24I, Source |
C1 C2 C3 |
Electrical data - Safety digital outputs
| Designation, Safety outputs |
DO |
| Sikkerhetsutgang |
short-circuit proof, p-type |
| Voltage drop Ud, maximum |
2 V |
| Leakage current Ir, maximum |
0,5 mA |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Current, Utilisation category DC-12 |
0,8 A |
| Voltage, Utilisation category DC-13 |
24 VDC |
| Current, Utilisation category DC-13 |
0,8 A |
| Note, Utilisation category DC-13 |
Inductive load, maximum 400 mH |
| Brytefrekvens, maksimum |
1 Hz |
| Testpulsens varighet, maksimum |
1 ms |
| Testpulsintervall, minimum |
15 ms |
| Testpulsintervall, maksimum |
500 ms |
| Classification ZVEI CB24I, Source |
C1 |
| Classification ZVEI CB24I, Sink |
C1 |
Electrical data - Diagnostic inputs / FB-Interface
| Betegnelse, diagnostiske innganger / FB-grensesnitt |
DI |
| Koplingsterskler |
−3 V … 5 V (Low) 15 V … 30 V (High) |
| Driftsstrøm ved 24 V |
12 mA |
| Filter for avvisning av inngang |
10 ms |
| Dataoverføringshastighet FB-grensesnitt |
19,2 kBaud |
Elektriske data - Taktutgang
| Designation, Test pulse outputs |
Y1 and Y2 |
| Versjon koblingselementer |
short-circuit proof, p-type |
| Voltage drop Ud, maximum |
1 V |
| Reststrøm lr, maksimum |
0,5 mA |
| Voltage, Utilisation category DC-12 |
24 VDC |
| Y1 Nominell driftsstrøm ved 24 V |
15 mA |
| Y2 Nominell driftsstrøm ved 24 V |
10 mA |
| Y2 Nominell driftsstrøm ved 0 V |
30 mA |
| Testpulsintervall, typisk |
500 ms |
| Testpulsens varighet, maksimum |
1 ms |
| Classification ZVEI CB24I, Sink |
C1 |
| Classification ZVEI CB24I, Source |
C1 |
Statusvisning - LED 01
| LED status |
Error LED device port |
| LED position |
E: 0 ... 7 |
| LED-farge |
grønn/rød |
Statusvisning - LED 02
| LED status |
Input LED device port |
| LED position |
I: 0 ... 7 |
| LED-farge |
Gul |
Statusvisning - LED 03
| LED status |
LED Link Ethernet port |
| LED position |
L: P1 + P2 |
| LED-farge |
grønn |
Statusvisning - LED 04
| LED status |
LED Activity Ethernet port |
| LED position |
A: P1 + P2 |
| LED-farge |
Gul |
Statusvisning - LED 05
| LED status |
Module status LED |
| LED position |
"MS": Module |
| LED-farge |
grønn/rød |
Statusvisning - LED 06
| LED status |
Network Status LED |
| LED position |
"NS": Module |
| LED-farge |
grønn/rød |
Statusvisning - LED 07
| LED status |
Fieldbox error LED |
| LED position |
"Err": Module |
| LED-farge |
grønn/rød |
Statusvisning - LED 08
| LED status |
Power-LED fieldbox |
| LED position |
"Pwr": Module |
| LED-farge |
grønn |
Diverse data
| Merknad (app-applikasjoner) |
Sikker feltboks med desentralisert I/Os |
Språk filter
Datablad
Komme i gang
Bruksanvisning og konformitetserklæring
BG-testsertifikat
UL sertifikat
UKCA certificate
Enhetsbeskrivelsesfiler
Informasjon
Brosjyre
SISTEMA-VDMA Bibliotek/Library
Last ned den nyeste versjonen av Adobe Reader
Produktbilde (enkelt katalogbilde)
ID: ksfb-eip-f03
| 2,4 MB | .jpg | 352.778 x 1091.4940000000001 mm - 1000 x 3094 px - 72 dpi
| 186,9 kB | .png | 74.083 x 228.953 mm - 210 x 649 px - 72 dpi
| 40,3 kB | .jpg | 39.864000000000004 x 123.47200000000001 mm - 113 x 350 px - 72 dpi
| 30,7 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 25,1 MB | .png | 169.333 x 524.0020000000001 mm - 2000 x 6189 px - 300 dpi
Dimensjonsriktig tegning grunnenhet
| EU Declaration of Conformity | ![]() |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | SFB-EIP |
| Type: | See ordering code |
| Description of the component: | Safety fieldbox (IO module with fieldbox interface) |
| Relevant Directives: | Machinery Directive | 2006/42/EC |
| EMC-Directive | 2014/30/EU | |
| RoHS-Directive | 2011/65/EU |
| Applied standards: | EN 61131-2:2007 EN 60947-5-3:2013 EN ISO 13849-1:2015 IEC 61508 parts 1-7:2010 |
| Notified body for Type Examination: | TÜV Rheinland Industrie Service GmbH Am Grauen Stein, 51105 Köln ID n°: 0035 |
| EC-Type Examination Certificate: | 01/205/5878.03/23 |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, June 5, 2023 |
![]() |
| Authorised signature Philip Schmersal Managing Director |
| UK Declaration of Conformity | ![]() |
| Company: | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby, under sole responsibility, certify that the hereafter described components both in their basic design and construction conform to the relevant statutory requirements, regulations and designated standards of the United Kingdom. |
| Name of the component: | SFB-PN-IRT SFB-EIP |
| Type: | See ordering code |
| Description of the component: | Safety fieldbox (IO module with fieldbox interface) |
| Relevant legislation: | Supply of Machinery (Safety) Regulations | 2008 |
| Electromagnetic Compatibility Regulations | 2016 | |
| The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations | 2012 |
| Designated standards: | EN 61131-2:2007 EN 60947-5-3:2013 EN ISO 13849-1:2015 EN 61508 parts 1-7:2010 |
| Approved body for Type Examination: | TÜV Rheinland UK Ltd. 1011 Stratford Road Solihull, B90 4BN ID: 2571 |
| Type examination certificate: | 01/205U/5878.01/23 |
| UK-Importer / Person authorised for the compilation of the technical documentation: | Schmersal UK Ltd. Paul Kenney Unit 1, Sparrowhawk Close Enigma Business Park Malvern, Worcestershire, WR14 1GL |
| Place and date of issue: | Wuppertal, October 16, 2023 |
![]() |
| Authorised signature Philip Schmersal Managing Director |
Schmersal Nordiska AB, F O Petersons gata 28, S-421 31 Västra Frölunda
Data og verdier er kontrollert omhyggelig. Bilder kan avvike fra originalen. Ytterligere tekniske data finner du i manualen. Tekniske modifiseringer og feil kan forkomme.
Generated at: 19.04.2026, 16:04

