ZQ 700 FK-AS

Item number: 101215845

ZQ 700 FK-AS

Item number: 101215845

Downloads

ePLAN Data

CADENAS CAD Data

SISTEMA Data

AS interface Connection for flat cable, bottom, can be rotated
Thermoplastic enclosure
One tension force for cable lengths up to 10 m
Release push button
Position indicator
Twisting of towing eye not possible
wire pull and breakage detection
Double-insulated
Integrated AS-Interface
Suitable for AS-i Power24

Ordering data

Note (Delivery capacity)	Not available!
Product type description	ZQ 700 FK-AS
Article number (order number)	101215845
EAN (European Article Number)	4030661404677
eCl@ss number, version 12.0	27-37-12-01
eCl@ss number, version 11.0	27-37-12-01
eCl@ss number, version 9.0	27-37-12-01
ETIM number, version 7.0	EC002033
ETIM number, version 6.0	EC002033

Approvals - Standards

Certificates	cULus ASi-SaW

General data

Standards	EN 50295 EN ISO 13849-1 EN ISO 13850 EN IEC 60947-5-1 EN IEC 61508
Housing material	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Material of the housing cover	Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Length of the wire, maximum	10 m
Reaction time, maximum	100 ms
Gross weight	265 g

Safety classification

Standards	EN IEC 61508
Performance Level, up to	e
Category	4
PFH value	1.40 x 10⁻⁸ /h
Note (PFH-value)	up to max. 5,000 switching cycles/year
Safety Integrity Level (SIL), suitable for applications in	3
Mission time	20 Year(s)

Mechanical data

Mechanical lifetime, minimum	100,000 Operations
Actuating force, maximum	200 N
Actuating travel	400 mm

Mechanical data - Connection technique

Termination	Connection for flat cable

Mechanical data - Dimensions

Length of sensor	51 mm
Width of sensor	40.5 mm
Height of sensor	182.5 mm

Ambient conditions

Degree of protection	IP67
Ambient temperature	-25 ... +60 °C
Storage and transport temperature	-25 ... +85 °C
Relative humidity, minimum	30 %
Relative humidity, maximum	95 %
Note (Relative humidity)	non-condensing non-icing
Resistance to vibrations	10 … 150 Hz, amplitude 0.35 mm / 5 g
Restistance to shock	15 g / 11 ms
Protection class	II

Ambient conditions - Insulation values

Rated insulation voltage U_i	32 V
Rated impulse withstand voltage U_imp	0.8 kV
Overvoltage category	III
Degree of pollution	3

Electrical data

Current consumption	50 mA
Switching principle	Snap action
Maximale Schalthäufigkeit	3,600 /h

Electrical data - AS Interface

Rated operating voltage	18 ... 31.6 VDC (Protection against polarity reversal)

Electrical data - AS-Interface specification

AS-i Version	V 3.0
AS-i Profile	S-0.B.F.F
AS-i, IO-Code	0x0
AS-i, ID-Code	0xB
AS-i, ID-Code1	0xF
AS-i, ID-Code2	0xF
AS-i Input, Channel 1	Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input, Channel 2	Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Outputs, DO 0 … DO 3	No Function
AS-i Parameter bits, P0	Channel 2 switched
AS-i Parameter bits, P1	No function
AS-i Parameter bits, P2	No function
AS-i Parameter bits, P3	No function
Note (AS-i Parameter bits)	Set the parameter outputs to "1111" (0xF) FID: periphery error
AS-i Input module address	0
Note (AS-i Input module address)	Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

Note

Note (General)	Recommended cable lengths for pull-wire Emergency-Stop switches in relation to the range of ambient temperature. As the thimbles are subject to deformation in case of wire pull, the wire should be pulled several times after fitting. After that, the wire must be re-tensioned using the eyebolt or the tensioner. The addressing must take place via the M12 connector or the flat cable connection. At 2 m ... 5 m distance intermediate wire supports are required, see accessories

Product picture (catalogue individual photo)

ID: kzq70f03

| 686.6 kB | .jpg | 240.947 x 741.186 mm - 683 x 2101 px - 72 dpi

| 117.0 kB | .png | 74.083 x 227.542 mm - 210 x 645 px - 72 dpi

| 27.8 kB | .jpg | 40.217 x 123.47200000000001 mm - 114 x 350 px - 72 dpi

| 22.8 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi

| 9.8 MB | .png | 145.143 x 446.459 mm - 2000 x 6152 px - 350 dpi

Dimensional drawing basic component

ID: kzq-7g01

| 210.1 kB | .cdr |

| 9.3 kB | .png | 74.083 x 106.539 mm - 210 x 302 px - 72 dpi

| 281.9 kB | .jpg | 352.425 x 507.64700000000005 mm - 999 x 1439 px - 72 dpi

Dimensional drawing basic component

ID: 1zq-7g01

| 198.7 kB | .cdr |

| 10.5 kB | .png | 74.083 x 51.506 mm - 210 x 146 px - 72 dpi

| 106.7 kB | .jpg | 352.778 x 245.181 mm - 1000 x 695 px - 72 dpi

Characteristic curve

ID: kzq-7d01

| 18.9 kB | .cdr |

| 2.7 kB | .png | 74.083 x 43.392 mm - 210 x 123 px - 72 dpi

| 113.7 kB | .jpg | 352.778 x 207.43300000000002 mm - 1000 x 588 px - 72 dpi

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 17/04/2026, 18:25

Cart

Login Register now

ZQ 700 FK-AS

ZQ 700 FK-AS

Ordering data

Approvals - Standards

General data

Safety classification

Mechanical data

Mechanical data - Connection technique

Mechanical data - Dimensions

Ambient conditions

Ambient conditions - Insulation values

Electrical data

Electrical data - AS Interface

Electrical data - AS-Interface specification

Note

Language filter

Datasheet

Operating instructions and Declaration of conformity

UL Certificate

AS interface safety at work certificate

SISTEMA-VDMA library

Download the latest version of Adobe Reader

Product picture (catalogue individual photo)

Dimensional drawing basic component

Dimensional drawing basic component

Characteristic curve

Recently viewed

HINGE SWITCH M. ZUS. SFA/ST230.2/180

AZ 16-02ZVK-M16

BNS 40S-12ZG

BN 12-RZ/V