TV8S 355-11Z
| Product type description: TV(1)S 355-(2)Z-(3) |
| (1) | |
| 8 | Shaft bore Ø 8 mm |
| 10 | Shaft bore Ø 10 mm |
| (2) | |
| 02 | 2 NC contact |
| 03 | 3 NC contact |
| 11 | 1 NO contact/1 NC contact |
| 12 | 1 NO contact/2 NC contacts |
| (3) | |
| without | Cable entry M20 |
| NPT | Cable entry NPT 1/2" |
| ST | M12 connector with A-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.) |
| ST-2310 | M12 connector with B-coding (Caution! According to EN 60204-1, the versions with connector must only be used in PELV circuits.) |
| G24 | with LED (only available for version with one NO and one NC contact) |
- Metal enclosure
- Good resistance to oil and petroleum spirit
- Actuator heads can be repositioned by 4 x 90°
- 66,7 mm x 107 mm x 65,3 mm
- Actuator shaft can be turned 360°
Ordering data
| Product type description |
TV8S 355-11Z |
| Article number (order number) |
151117209 |
| eCl@ss number, version 12.0 |
27-27-06-09 |
| eCl@ss number, version 11.0 |
27-27-06-09 |
| eCl@ss number, version 9.0 |
27-27-06-09 |
| ETIM number, version 7.0 |
EC002591 |
| ETIM number, version 6.0 |
EC002591 |
Approvals - Standards
| Certificates |
cULus |
General data
| Housing material |
Light alloy die-casting |
| Housing coating material |
painted |
| Gross weight |
315 g |
Safety classification
| Standards |
BG-GS-ET-15 EN ISO 13849-1 EN IEC 60947-5-1 |
| Mission time |
20 Year(s) |
Safety classification - Safety outputs
| B10D Normally-closed contact (NC) |
20,000,000 Operations |
Mechanical data
| Actuating element |
Other |
| Mechanical lifetime, minimum |
1,000,000 Operations |
| Positive break angle |
7 ° |
| Mounting hole for the shaft |
8 mm |
| Positive break torque |
0.6 Nm |
Mechanical data - Connection technique
| Termination |
Screw terminals M20 x 1.5 |
Mechanical data - connector side B
| Connector typ |
Female connector |
Mechanical data - Dimensions
| Length of sensor |
65.3 mm |
| Width of sensor |
66.7 mm |
| Height of sensor |
107 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-25 ... +70 °C |
Electrical data
| Thermal test current |
10 A |
| Utilisation category AC-15 |
230 VAC |
| Utilisation category AC-15 |
4 A |
| Utilisation category DC-13 |
24 VDC |
| Utilisation category DC-13 |
4 A |
| Switching principle |
Slow action |
| Maximale Schalthäufigkeit |
1,000 /h |
| Material of the contacts, electrical |
Silver |
Note
| Note (General) |
By turning the head in 90° steps, 8 actuating planes are possible. A Torx T10 screwdriver is required for this purpose. Even when the screw is removed, the head is self-retaining. The switch can still not be tampered. Adjustment tool: locking screw to fix, shaft pre-drilled to pin Universal joint available to compensate for axial displacement (only for shaft bore 10 mm) |
Language filter
Datasheet
Operating instructions and Declaration of conformity
UL Certificate
SISTEMA-VDMA library
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: ktv35f01
| 774.5 kB | .jpg | 352.778 x 496.711 mm - 1000 x 1408 px - 72 dpi
| 85.3 kB | .png | 73.73100000000001 x 104.069 mm - 209 x 295 px - 72 dpi
| 43.2 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 7.0 MB | .png | 166.55700000000002 x 234.596 mm - 2000 x 2817 px - 305 dpi
| 57.6 kB | .jpg | 87.489 x 123.47200000000001 mm - 248 x 350 px - 72 dpi
Dimensional drawing basic component
Dimensional drawing basic component
Sample application illustration product
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 17/04/2026, 11:05
Recently viewed
2N LIFT INDUCTION LOOP- 4M
T5C 236-02Z-M20
SRB301LCI 24VAC/DC
BNS 180-11Z 20,0M