SET SL 300-1250
SET SL 300-1250
Downloads
- Robust design
- 2 Contacts
- Can be mounted on existing glue-spreading machines, veneering presses, etc.
- Various lengths available
Ordering data
| Product type description |
SET SL 300-1250 |
| Article number (order number) |
101103154 |
| eCl@ss number, version 12.0 |
27-27-06-90 |
| eCl@ss number, version 11.0 |
27-27-06-90 |
| eCl@ss number, version 9.0 |
27-27-06-90 |
| ETIM number, version 7.0 |
EC002887 |
| ETIM number, version 6.0 |
EC002887 |
| Note (Ordering data) |
Note: The position switch with safety function is not included in delivery. The following variants can be selected: 1 NO/1 NC T3K 335-11Z-U90 - metal enclosure T3K 336-11Z-U90 - thermoplastic enclosure |
General data
| Standards |
EN IEC 60947-5-1 |
| Material of the latching |
Glass-fibre, thermoplastic |
| Material of the profile strip |
Aluminium |
| Side plate material |
Aluminium |
Mechanical data - Dimensions
| Width |
100 mm |
| Height |
260 mm |
| Length (L1) |
1,250 mm |
Ambient conditions
| Degree of protection |
IP67 |
| Ambient temperature |
-20 ... +55 °C |
| Storage and transport temperature |
-20 ... +70 °C |
Electrical data
| Switching element |
see switch description |
| Switching principle |
see switch description |
Scope of delivery
| Scope of delivery |
Flap profile Latching |
| Scope of delivery of mounting material |
Supporting profile Side plates |
Language filter
Datasheet
Mounting and wiring instructions
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: ksl30f01
| 438.0 kB | .jpg | 352.778 x 294.922 mm - 1000 x 836 px - 72 dpi
| 34.3 kB | .png | 74.083 x 62.089000000000006 mm - 210 x 176 px - 72 dpi
| 47.4 kB | .jpg | 123.47200000000001 x 103.364 mm - 350 x 293 px - 72 dpi
| 45.7 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 4.0 MB | .png | 142.697 x 119.29400000000001 mm - 2000 x 1672 px - 356 dpi
Dimensional drawing basic component
131171823 T3K 336-11Z-U90
- 1 Cable entry M 20 x 1.5
- Actuating head rotated by 90°
- Design to EN 50041
- Actuation from bottom parallel to the switch, therefore only suitable for small housings.
- Thermoplastic enclosure
- Double-insulated
- Good resistance to oil and petroleum spirit
- Wide range of alternative actuators
- Actuator heads can be repositioned by 4 x 90°
151171823 T3K 336-11Z-M20-U90
- Design to EN 50041
- Actuation from bottom parallel to the switch, therefore only suitable for small housings.
- Thermoplastic enclosure
- Double-insulated
- Good resistance to oil and petroleum spirit
- Wide range of alternative actuators
- Actuator heads can be repositioned by 4 x 90°
- 1 Cable entry M 20 x 1.5
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 15/04/2026, 06:05
Recently viewed
MZM 120 BM ST2-SD2PRE-A
