G150-150Z11Y-FL2
G150-150Z11Y-FL2
Downloads
- Metal enclosure with impact-resistant plastic hood
- Various cam shapes for varying switch travel
- Available for easy adjustment of switching points by setting disk cams from front
Ordering data
| Product type description |
G150-150Z11Y-FL2 |
| Article number (order number) |
101167267 |
| EAN (European Article Number) |
4030661218472 |
| eCl@ss number, version 12.0 |
27-27-06-01 |
| eCl@ss number, version 11.0 |
27-27-06-01 |
| eCl@ss number, version 9.0 |
27-27-06-01 |
| ETIM number, version 7.0 |
EC000030 |
| ETIM number, version 6.0 |
EC000030 |
Approvals - Standards
| Certificates |
cULus CCC |
General data
| Housing material |
Light alloy die-casting |
| Material of the housing cover |
Glass-fibre, thermoplastic |
| Gross weight |
1,480 g |
General data - Features
| Number of normally closed (NC) |
1 |
| Number of NC, left |
1 |
| Number of normally open (NO) |
1 |
| Number of NO, left |
1 |
Mechanical data
| Mounting |
floor mounting head side |
| Gear ratio |
1:150 |
| Type of shaft mounting |
Full shaft |
| Type of mounting flange |
FL2 |
Mechanical data - Connection technique
| Cable entry |
2 x M20 x 1,5 |
| Cable section, maximum |
2.5 mm² |
Mechanical data - Dimensions
| Length |
244 mm |
| Width |
160 mm |
| Height |
175 mm |
| Length of shaft |
36 mm |
| Diameter of Shaft |
12 mm |
| Tolerance of the diameter of shaft |
h8 |
Ambient conditions
| Degree of protection |
IP65 |
Ambient conditions - Insulation values
| Rated insulation voltage Ui |
250 VAC |
| Rated impulse withstand voltage Uimp |
4 kV |
Electrical data
| Material of the contacts, electrical |
Silver |
| Switch element left |
Z 6881-11-1 |
Language filter
Datasheet
Operating instructions and Declaration of conformity
CCC certification
Download the latest version of Adobe Reader
Product picture (catalogue individual photo)
ID: kg50-f05
| 523.4 kB | .jpg | 352.778 x 440.97200000000004 mm - 1000 x 1250 px - 72 dpi
| 62.8 kB | .png | 74.083 x 92.42800000000001 mm - 210 x 262 px - 72 dpi
| 62.8 kB | .png | 74.083 x 92.428 mm - 210 x 262 px - 72 dpi
| 41.3 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 5.5 MB | .png | 169.249 x 211.667 mm - 1999 x 2500 px - 300 dpi
| 43.4 kB | .jpg | 98.778 x 123.47200000000001 mm - 280 x 350 px - 72 dpi
Product picture (catalogue individual photo)
ID: kg50-f07
| 565.9 kB | .jpg | 352.425 x 538.339 mm - 999 x 1526 px - 72 dpi
| 77.9 kB | .png | 74.083 x 112.88900000000001 mm - 210 x 320 px - 72 dpi
| 77.9 kB | .png | 74.083 x 112.889 mm - 210 x 320 px - 72 dpi
| 34.6 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 6.1 MB | .png | 705.2030000000001 x 1077.031 mm - 1999 x 3053 px - 72 dpi
| 36.0 kB | .jpg | 80.786 x 123.47200000000001 mm - 229 x 350 px - 72 dpi
Product picture (catalogue individual photo)
ID: kg50-f11
| 573.4 kB | .jpg | 352.778 x 329.142 mm - 1000 x 933 px - 72 dpi
| 56.6 kB | .png | 74.083 x 69.144 mm - 210 x 196 px - 72 dpi
| 56.6 kB | .png | 74.083 x 69.144 mm - 210 x 196 px - 72 dpi
| 53.2 kB | .png | 74.083 x 74.083 mm - 210 x 210 px - 72 dpi
| 5.6 MB | .png | 169.333 x 157.988 mm - 2000 x 1866 px - 300 dpi
| 71.0 kB | .jpg | 123.47200000000001 x 115.358 mm - 350 x 327 px - 72 dpi
Dimensional drawing basic component
Dimensional drawing miscellaneous
101138616 Z 6881-11-1
- screw or spade terminals
- Thermoplastic enclosure
- snap action
| EU Declaration of Conformity |  |
| Original | K.A. Schmersal GmbH & Co. KG Möddinghofe 30 42279 Wuppertal Germany Internet: www.schmersal.com |
| Declaration: | We hereby certify that the hereafter described components both in their basic design and construction conform to the applicable European Directives. |
| Name of the component: | G50, G150, G50-2047 |
| Type: | See ordering code |
| Description of the component: | Gear switch |
| Relevant Directives: | Valid up to April 19, 2016 | Valid as of April 20, 2016 | |
| Machinery Directive 1) | 2006/42/EC | 2006/42/EC | |
| Low Voltage Directive 2) | 2006/95/EC | 2014/35/EU | |
| RoHS-Directive | 2011/65/EU | 2011/65/EU |
| Affixing of the CE conformity mark: | 1) for safety components, whose type plate is labelled "safety component" 2) for gear switches without safety function |
| Applied standards: | DIN EN 60947-5-1: 2010 DIN 56950-1: 2012 1) |
| Person authorised for the compilation of the technical documentation: | Oliver Wacker Möddinghofe 30 42279 Wuppertal |
| Place and date of issue: | Wuppertal, February 10, 2016 |
 |
| Authorised signature Philip Schmersal Managing Director |
K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal
The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.
Generated at: 21/04/2026, 03:23
Recently viewed
BN 325-R-1279 2,0M
MS 6600-11-K-Y 2,5M
BNS 36-02Z-R 2,5M
Z4V7H 355-02Z
PS215-T11-R200
SLC440COM-ER-0330-35