schmersal_s_icon.png

BN 31-10Z 3,0M

Item number: 101057204
BN 31-10Z 3,0M

Downloads

ePLAN Data
CADENAS CAD Data
SISTEMA Data
Product type description:
BN 310-(1)Z

(1)
011 NC
101 NO
R1 bistable contact
Not all component variants, which are possible according to this order code are available and/or technically feasible.
  • 1 Reed contakts
  • Non-contact principle
  • Actuation from side
  • Flat design
  • Actuating surface and direction of actuation marked by switch symbol
  • 88 mm x 25 mm x 13 mm
  • Thermoplastic enclosure
  • Actuating distance up to 60 mm depending on actuating magnet and version
  • 2 reed contacts

Ordering data

Product type description

BN 31-10Z 3,0M
Article number (order number)

101057204
EAN (European Article Number)

4030661024936

General data

Working principle

Magnetic drive
Housing construction form

rectangular
Housing material

Glass-fibre, reinforced thermoplastic
Gross weight

170 g

General data - Features

Suitable for elevators

Yes
Number of normally open (NO)

1

Mechanical data

Actuating element

Magnet
Mechanical lifetime, minimum

1,000,000,000 Operations
Actuating speed, maximum

18 m/s
Mounting

Enclosure with mounting slots

Mechanical data - Switching distances

Switching distance Sn

5 mm … 50 mm

BP 10 = 5 mm

2 x BP 10 = 17 mm
Note (Switching distance Sn)

Actuating distance up to 60 mm depending on actuating magnet and version. The specified switching distances are applicable for the actuation of individually mounted components without ferromagnetic influence. A change of the distance, either positive or negative, is possible due to ferromagnetic influences. The mutual interference between multiple actuating magnets must be observed.
Note (switching distance)

All switching distances in accordance EN IEC 60947-5-2

Mechanical data - Connection technique

Length of cable

3 m
Termination

Pre-wired cable
Number of cable wires

2
Wire cross-section

0.75 mm2
Wire cross-section

18 AWG
Material of the Cable mantle

PVC
Cable type

H03VV-F

Mechanical data - Dimensions

Length of sensor

13 mm
Width of sensor

88 mm
Height of sensor

25 mm

Ambient conditions

Degree of protection

IP67
Ambient temperature

-25 ... +75 °C
Resistance to vibrations

10 … 55 Hz, amplitude 1 mm
Restistance to shock

30 g / 11 ms

Electrical data

Switching voltage, maximum

250 VAC
Switching voltage, maximum

250 VDC
Switching current, maximum

3 A
Switching capacity, maximum

120 W
Switching capacity, maximum

120 VA
Switching principle

Reed contacts, Non-contact principle
Bounce duration, maximum

0.5 ms
Switching element

Normally open contact (NO)

Scope of delivery

Scope of delivery

Actuator must be ordered separately.

Accessory

Recommendation (actuator)

BP 10

2x BP 10

BP 15

2x BP 15

2x BP 15/2

BP 34

BP 20

BP 31

BP 11

BP 12

BP 21

BE 20
Recommendation (actuator, lift switchgear)

BP 10

2 x BP 15/2

2 x BP 15

2 x BP 10

BP 15

BP 34

Note

Note (General)

The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.

When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). This does not apply to the bistable contact.

The switch is to be mounted on iron with a non-magnetic layer of at least 20 mm.

K.A. Schmersal GmbH & Co. KG, Möddinghofe 30, 42279 Wuppertal

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 18/04/2026, 14:29

Recently viewed

T2C 470-33Y
T2C 470-33Y
BNS 16-12ZU-ST3
BNS 16-12ZU-ST3
BNS 303-11Z 3,0M
BNS 303-11Z 3,0M