schmersal_s_icon.png

BNS-Y-11

Item number: 101194059
BNS-Y-11

Downloads

ePLAN Data
CADENAS CAD Data
SISTEMA Data
  • enables the interconnection and the connection of BNS safety sensors to a common safety monitoring module
  • for BNS 33, BNS 36, BNS 260 (with 1 NC/1 NO)

Ordering data

Product type description

BNS-Y-11
Article number (order number)

101194059
EAN (European Article Number)

4030661358178
eCl@ss number, version 12.0

27-44-01-06
eCl@ss number, version 11.0

27-44-01-06
eCl@ss number, version 9.0

27-44-01-06
ETIM number, version 7.0

EC002925
ETIM number, version 6.0

EC002925

General data

Versions

Y-adapter
Connector (electric)

2 x Female connector, 4-pole

1 x Male connector, 4-pole
Gross weight

22 g

Mechanical data

Mechanical lifetime, minimum

100 Cycles

Mechanical data - Dimensions

Length

10 mm
Width

23.5 mm
Height

31 mm
Diameter of the ISO-thread

M8

Ambient conditions

Degree of protection

IP67
Ambient temperature

-25 ... +70 °C

Accessory

Recommendation (product combination)

BNS 33

BNS 36

BNS 260

Note

Note (General)

Any conventional 4-pole cable with M8 connector can be used as connecting cable.

The sensor chain is extended by connecting further Y-adapters in the direction of the arrow. The last safety sensor is connected to the female connector on the extension as the termination.

Only safety sensors with the same contact configuration can be connected in series. The types BNS-Y-11 and BNS-Y-02 are not allowed to be connected together in a mixed configuration.

The maximum length of the series wiring is 50 m.

The adapter BNS-Y-11 is intended for safety sensors BNS with normally closed and normally open contacts. With the BNS-Y-11, a series-parallel circuit is set up where the normally closed contacts on the safety sensors are connected in series and the normally open contacts are connected in parallel.

Schmersal India Pvt. Ltd., Plot No - G-7/1, Ranjangaon MIDC, Tal. - Shirur, Dist.- Pune 412 220

The details and data referred to have been carefully checked. Images may diverge from original. Further technical data can be found in the manual. Technical amendments and errors possible.

Generated at: 17/04/2026, 11:27 pm